PRODUCTS>EJECTION. EJECTION There are 77 products. Subcategories. The latest products introduced on the market also cover big undercuts (up to. Hardened, ground and fully adjusted slides set ready for installation, which can.

All CUMSA catalogs and technical brochures

The pins can be taken out from the front of the tool. This unit is bigger than the GR to allow for the greater angles and it This unit is fixed through both ejector plates in conjunction with the spacer discs to Previous 1 2 3 4 Next.

Its rectangular shape simplifies machining. Z to A Reference: It is easy to Z to A Reference: Allows the slide to be adjusted with the mold closed.

It incorporates a pre-machined hole for the angle pin and the heel for the adjustment; as shown in the Standard Heel Unit CR. This unit is fixed through both ejector plates in conjunction with the spacer discs to provide support to the plates.

Manufacturer of Transponder Keys, Locksets and Electrical Products

The ejector base unit is an automatic unit which holds the ejector pin in position Interchangeable and completly adjusted, only requires the part detail to be machined The mold is unlocked automatically, when mounted on the machine. A to Z Product Name: There is no requirement for strip down when repair or maintenance is needed. These are fixed to the ejector plates so eliminating machining in the back plates. Useful to obtain automatic ejection strokes in molds with sprung cores and collapsible cores units.

Allows to increase the stroke of selected ejectors within the tool.

Two outer screws force the heel against the slide forming the shut off, cattalogo the central screw locks it into position. The ejector base unit is an automatic unit which holds the ejector pin in position until the top is actuated. Keeps the mold closed when it is not in the machine.

Incorporates a magnetic Retainer RM which must be installed after the slide adjustment and allows fixing the slide Adjustable with the mold closed.

Two outer screws force the heel against the slide These are fixed to the ejector plates so eliminating Previous 1 2 3 4 Next.

A to Z Product Name: Interchangeable and completly adjusted, only requires the part detail to be machined. Different hardness and materials between CA and BC guarantees smooth movement.

PRODUCTS – CUMSA

Hardened steel pre-adjusted for immediate use. Sort by Product Name: It is easy to install due to its cylindrical shape and possible to automate conventional tools. Z to A Show 24 48 This unit divides the ejection travel in two predefined steps.

Incorporates a magnetic Retainer RM which must be installed after the slide adjustment catxlogo allows fixing the slide movement where needed. A to Z Reference: A to Z Reference: